Onyx Nylon 6
Micro carbon fiber filled nylon that forms the foundation of Markforged composite parts.
Onyx — A composite base material — is a micro carbon fiber filled nylon that yields accurate parts with near flawless surface finish. Few materials have the versatility of Onyx; it offers high strength, toughness, and chemical resistance when printed alone, and can be reinforced with Continuous Fibers to yield aluminum-strength parts.
Flexural Modulus
(ASTM D790)
- 3600 Mpa
- 522 Ksi
Flexural Strength
(ASTM D790)
- 81 Mpa
- 12 Ksi
Tensile Modulus
(ASTM D638)
- 1400 Mpa
- 203 Ksi
Impact Resistance - Notched Izod
(ASTM D256 Method A)
- 330 J/M
- 6.18 FT-LB/IN
Heat Deflection - Temperature
(0.455 MPa (66 Psi), ASTM D648)
- 145 °C
- 293 °F
Density
- 1.1 (G/Cm3)
Parts Gallery
No Gallery Found